Part 2 of One Room Challenge
I thought building the carcass of this window seat was time consuming but dealing with plywood was another time eater for me -mainly because I’m new to working with plywood and new to using a circular saw.
Weeks 3 and 4 of the One Room Challenge included learning how to use my Kreg jig pocket hole maker. This was exciting because those joinery holes are the best! If you’ve been following in my stories, then you know I wanted to pocket hole everything!
Now that the carcass of the window seat is completed, I needed to get the plywood going on this baby. This meant I needed to learn how to use my circular saw, which intimidated me at first. It’s loud and keeping the straight line while cutting is a monster! So, I tucked it away in a corner for far too long.
But you know I won’t walk in fear or intimidation for a lengthy period of time! To get my cuts a little straighter, I purchased the Kreg Rip Cut guide, which I will add to my list of good beginner DIY items to have. That blog post is in the making.
I first did a few practice cuts on the plywood I purchased for the garage shelves because as mentioned throughout my IG Stories, plywood and lumber in genral has become quite costly! I cannot stress the appreciation I have for the Kreg Rip Cutter! Although the plywood sheets for the garage shelves were pricey (by my standard), it wasn’t as much as the 3/4 plywood needed for the window seat.
Before purchasing my plywood, I calculated how many sheets would be needed. Since my window seat is 100 inches long, I knew I would need 2 sheets. I wasn’t excited about this, but had I planned better, I probably would’ve done a built-in bookcase on the end of the seat. Oh well, lesson learned! Take your time; sit in the space and really give thought to budget based on your design.
Currently, Week 8 is upon me, and the push is on! The carcass is built and guess what?! All the pieces for the window seat have been cut and painted. Now it’s a matter of putting it all together. I’m learning as I go, but this is what a DI-trY is all about!
Stick around for the final reveal! In the meantime, be sure to support the featured designers and guest participants within the One Room Challenge with media partner Apartment Therapy over on their blog www.oneroomchallenge.com/orc-blog
Keep it genuine.