Making An Entry

Upon entering my home, there’s a blank wall needing some attention. If you’ve been rolling with me in my stories over on Instagram, then you know the wall. Yep, uh huh, that one.

Listen, I want this wall to be that curiosity piece. You know? The one where people see it then wonder what other hidden DI-trY gems does this home possess?


Here enters…

Lé Slat Wall

For the longest, this wall has been bare. Like seriously… No color; no art, no nothing! Oh but baby, that’s about to change with yet another wall upgrade! If you didn’t catch the first upgrade, check out these posts on adding wall moulding and an Artsy Fartsy DIY art project using hot glue! You’ll love ‘em! For today’s DI•trY, you will need the following:


Of course, there’s always some Pinterest inspo to help get the design juices flowing. I usually try to go with no more than five ideas; or else I risk having analysis paralysis and won’t start! You ever get like this with too many options? I know I do.

#block-yui_3_17_2_1_1644551360273_10236 .sqs-gallery-block-grid .sqs-gallery-design-grid { margin-right: -20px; }
#block-yui_3_17_2_1_1644551360273_10236 .sqs-gallery-block-grid .sqs-gallery-design-grid-slide .margin-wrapper { margin-right: 20px; margin-bottom: 20px; }

Before the fun…

Before the fun begins, I had to take care of the not so fun parts, at least to me they aren’t. I painted the wall Midnight Blue by Behr paint, followed by sanding my slats.

On my Instagram stories, I shared my fear of adding color in my home, but I’m gradually getting over it. If you’d like to try this project, you can shop materials here.

FYI… I brought my slats inside to get acclimated to the atmosphere of the house versus having them in the cold garage. Wood contracts, so I wanted the slats to do what they do in the environment of the installation, prior to staining.


Stain On…

Before taking on this DI•trY project, I honestly did NOT think staining slats would dang near take me out! In between life happening (per usual), there was plenty of staining. Hear me when I say PLENTY of staining (this is where I begged myself to abandon this project)!

Needless to say, I didn’t flake out on the slat wall. Shucks, I purchased all these slats already and the price of wood today is not ya friend! Needless to say, I’m not wasting any money simply because I had a case of the ‘don’t wannas’!

The idea…

Execution…

Of course once the staining was done, there’s the cutting. I cut my slats based on the above idea drawing (obviously not drawn to scale).

  • Started with 3 vertical slats, affixed using my 1/4 inch multi-screws.

  • Used my 1×6 as the leading board (header) and wanted to use same size as the ending board (footer)

  • Atop the slats and following the header board, I used my nail gun to attach my cut horizontal slats (again, based on my above “Idea” drawing).

  • Using a scrap piece of wood, I was able to create equal spacing between the slats. This helps eliminate mis-measuring and BONUS: the spacer can also serve as a small shelf. (Note: I’m not placing anything super heavy on this tiny shelf. I’ve opted for small decor, to include a small vase with a plant cutting)


Reveal…

I’m not one for prolonging the reveal so here’s the 95% finish of the slat/plant wall.


Why 95%

Why 95% you ask? Well, turns out the bottom portion of the wall isn’t straight so the bottom boarder slat can’t simply lay flat and get nail gunned like the top boarder. This places a slight burnt crisp on my cookies – meaning I’ll need to figure something out.


HOWEVER(comma), it’s going to have to go on the backlog because I’m totally over all the staining and the One Room Challenge is headed my way! So let’s end on a good note.

Possible changes…

also known as The Backlog

I’m thinking I would like to bring the Midnight Blue Behr paint slightly higher up the wall. Perhaps, I’ll also move the slat wall over to the right, and cut the bottom portion up above the electrical outlet.

But again… that’s all BackLog and we’ve got more plans for this space during the One Room Challenge!


Till we meet again… Keep it Genuine!

Ya girl, Kim!